User manual Philips Avance Collection HD2072 (English – 2 pages)

HD2072
HD2073

Register your product and get support at

www.philips.com/welcomeUser manual 使用手册

3

Bạn đang đọc: User manual Philips Avance Collection HD2072 (English – 2 pages)

Use the appliance

Warning

•

If you wish to cancel a function once it is

selected, do not lift the top unit to prevent the

facial scalding. You can unplug the power cord,

re-plug it, and then select another function.

Make soymilk

•

Measure ingredients as instructed. You can adjust the

quantity to fit your personal taste.

•For 2-4 people .

1

Take a cup of dry soybeans with supplied measuring

cup and wash it thoroughly.

•

To extend the life of the blade, soak the soybeans

(8-9 hours in fall and spring, 6-7 hours in summer,

and 9-10 hours in winter) and wash it thoroughly

before processing .

2 Put the soybeans evenly at the bottom of the pot .

3

Pour water into the pot. Make sure that the water level

is between MAX (the maximum level indication) and

MIN( the minimum level indication ) .

4

Put the top unit into the pot. Make sure that the upper

plug is correctly inserted into the connector.

5

Open the power connection cover, insert the power

cord, and connect the power.

»

The indicators flash in cycle, indicating that the power

is connected .

6

Press Select to select Soymilk.

»

The Soymilk indicator lights up.

7

Press

Start

.

»

The

In Progressindicator flashes and the appliance

sounds once, indicating that processing starts.

»

After about 25 minutes, you will hear 6 beeps and

the

Keep Warmindicator will light up indicating that

soymilk is ready. The appliance will automatically enter

keep warm mode. This lasts for an hour, and then

automatically stops ( see the Keep warm section ) .

8

After processing, disconnect the power. Hold the handle of

the pot tightly with one hand and lift the top unit with theother hand .

9

Filtrate soymilk with the filter and it is ready to serve. You

can add some sugar before serving.

Tips

•

To shorten the processing time, you can add

warm water no hotter than 70°C.

•

Soymilk can also be served without being

 ltrated .

Make five grains soymilk

•

Measure ingredients as instructed. You can adjust the

quantity to fit your personal taste.

•

For 2-4 servings.

1 Measure 30 g of soybeans ( around 1/2 cup ) and 50 g of

rice (around 1/2 cup) with the supplied measuring cup.

Wash them thoroughly.

•

To extend the life of the blade, soak the soybeans

(8-9 hours in fall and spring, 6-7 hours in summer,

and 9-10 hours in winter) and wash it thoroughly

before processing .

2

Put the rice and the soybeans evenly at the bottom of

the pot .

3

Pour water into the pot. Make sure that the water level

is between MAX (the maximum level indication) and

MIN( the minimum level indication ) .

4

Put the top unit into the pot. Make sure that the upper

plug is correctly inserted into the connector.

5

Open the power connection cover, insert the power

cord, and connect the power.

»

The indicators flash in cycle, indicating that the power

is connected .

6

Press Select to select Five Grains Soymilk.

»

The

Five Grains Soymilkindicator lights up .

7

Press

Start

.

»

The

In Progressindicator flashes and the appliance

sounds once, indicating that processing starts.

»

After about 26 minutes, you will hear 6 beeps and

the

Keep Warmindicator will light up indicating that

soymilk is ready. The appliance will automatically enter

keep warm mode. This lasts for an hour, and then

automatically stops ( see the Keep warm section ) .

8

After processing, disconnect the power. Hold the handle of

the pot tightly with one hand and lift the top unit with theother hand .

9

Pour soymilk into the soymilk cup, and it is ready to serve.

You can add some sugar before serving.

Tip

•

To shorten the processing time, you can add

warm water no hotter than 70°C.

Make rice paste

•

Measure ingredients as instructed. You can adjust the

quantity to fit your personal taste.

•

Example recipes: lily bulb and barley rice paste, for 2-4

servings.

1

Measure 35g of barley and 35g of rice (around 2/5

cup each) with supplied measuring cup. Then, take

20g of fresh lily bulbs (around 7-8 pieces). Wash them

thoroughly.

2

Put the lily bulbs, barley, and rice evenly at the bottom

of the pot .

3

Pour water into the pot. Make sure that the water level

is between MAX (the maximum level indication) and

MIN( the minimum level indication ) .

4

Put the top unit into the pot. Make sure that the upper

plug is correctly inserted into the connector.

5

Open the power connection cover, insert the power

cord, and connect the power.

»

The indicators flash in cycle, indicating that the power

is connected .

6

Press Select to select Rice Paste.

»

The Rice Paste indicator lights up.

7

Press

Start

.

»

The

In Progressindicator flashes and the appliance

sounds once, indicating that processing starts.

»

After about 26 minutes, you will hear 6 beeps and the

Keep Warmindicator will light up indicating that rice

paste is ready. The appliance will automatically enter

keep warm mode. This lasts for an hour, and then

automatically stops ( see the Keep warm section ) .

8

After processing, disconnect the power. Hold the handle of

the pot tightly with one hand and lift the top unit with theother hand .

9

Pour rice paste into the soymilk cup, and it is ready to serve.

You can add some sugar before serving.

Tip

•

To shorten the processing time, you can add

warm water no hotter than 70°C.

Make fruit/ veggie drink

•

Measure ingredients as instructed. You can adjust the

quantity to fit your personal taste.

•

Example recipe: banana milkshake, for 2-4 servings.

1 Cut 3 bananas ( about 400 g ) into 1 cm cubes .

2 Put the banana cubes evenly at the bottom of the pot .

3

Pour 300ml of milk and some water into the pot.

Make sure that the water mark is between MAX (the

maximum level indication) and

MIN( the minimum level

indication ) .

4

Put the top unit into the pot. Make sure that the upper

plug is correctly inserted into the connector.

5

Open the power connection cover, insert the power

cord, and connect the power.

»

The indicators flash in cycle, indicating that the power

is connected .

6

Press Select to select

Fruit/Veggie Drink.

»

The

Fruit/Veggie Drinkindicator lights up .

7

Press

Start

.

»

The

In Progressindicator flashes and the appliance

sounds once, indicating that processing starts. After

about 4 minutes, you will hear 6 beeps, indicating that

milkshake is ready.

8

After processing, disconnect the power. Hold the

handle of the pot tightly with one hand and lift the topunit with the other hand .

9

Pour banana milkshake into the soymilk cup, and it

is ready to serve. You can add some sugar before

serving.

Tips

•

After banana milkshake is ready, serve at once

to avoid oxidization.

•

Wait about 10 minutes until the appliance

cools down before the next use. This makes

the appliance more durable.

Make vegetable puree soup

•

Measure ingredients as instructed. You can adjust the

quantity to fit your personal taste.

•

Example recipes: tremella, lotus seed, and chinese date

soup, for 2-4 servings.

1

Take 35g of dry lotus seeds, 20g of chinese dates with

the supplied measuring cup, and then 10g of tremella

(around 2 pieces). Wash and soak them thoroughly. Cut

the soaked tremella into pieces, and with the size of

soaked soybeans .

2 Put the cleaned ingredients evenly at the bottom of

the pot .

3

Pour water into the pot. Make sure that the water level

is between MAX (the maximum level indication) and

MIN( the minimum level indication ) .

4

Put the top unit into the pot. Make sure that the upper

plug is correctly inserted into the connector.

5

Open the power connection cover, insert the power

cord, and connect the power.

»

The indicators flash in cycle, indicating that the power

is connected .

6

Press Select to select Pureed Soup.

»

The Pureed Soup indicator lights up.

7

Press

Start

.

»

The

In Progressindicator flashes and the appliance

sounds once, indicating that processing starts.

»

After about 26 minutes, you will hear 6 beeps and

the

Keep Warmindicator will light up indicating that

vegetable puree soup is ready. The appliance will

automatically enter keep warm mode. This lasts for

an hour, and then automatically stops (see the Keep

warm section ) .

8

After processing, disconnect the power. Hold the handle of

the pot tightly with one hand and lift the top unit with theother hand .

9

Pour puree into the soymik cup, and it is ready to serve. You

can add some sugar before serving.

Tip

•

To shorten the processing time, you can add

warm water no hotter than 70°C.

Make corn juice (HD2073 only)

•

Measure ingredients as instructed. You can adjust the

quantity to fit your personal taste.

•

For 2-4 servings.

1

Take 300-350g of fresh corn (around 5-6 cups with the

supplied measuring cup and wash it thoroughly.

2

Put the fresh corn evenly at the bottom of the pot.

3

Pour water into the pot. Make sure that the water level

is between MAX (the maximum level indication) and

MIN( the minimum level indication ) .

4

Put the top unit into the pot. Make sure that the upper

plug is correctly inserted into the connector.

5

Open the power connection cover, insert the power

cord, and connect the power.

»

The indicators flash in cycle, indicating that the power

is connected .

6

Press Select to select Corn Juice.

»

The Corn Juice indicator lights up.

7

Press

Start

.

»

The

In Progressindicator flashes and the appliance

sounds once, indicating that processing starts.

»

After about 26 minutes, you will hear 6 beeps and the

Keep Warmindicator will light up indicating that corn

juice is ready. The appliance will automatically enter

keep warm mode. This lasts for an hour, and then

automatically stops ( see the Keep warm section ) .

8

After processing, disconnect the power. Hold the handle of

the pot tightly with one hand and lift the top unit with theother hand .

9

Pour corn juice into the soymilk cup, and it is ready to serve.

You can add some sugar before serving.

Tip

•

To shorten the processing time, you can add

warm water no hotter than 70°C.

Keep Warm

After soymilk, rice paste, pureed soup, or corn juice

is made, you will hear 6 beeps and the

Keep Warm

indicator will light up. The keep warm function lasts for

an hour, and then automatically stops.

Tips

•If you lift the top unit as soon as processing

is complete, the appliance does not start the

keep warm function.

•

The appliance does not start the keep warm

function at the completion of fruit/veggie

drink .4

Cleaning

Note

•

Disconnect the power and remove the power

cord before cleaning or disassembling this

appliance .

•

Do not immerse the top unit in water.

•

To prevent scalding, do not touch the top

unit or inner side of the pot before they cooldown .

•

Take care of sharp blades during cleaning to

avoid cutting yourself and others.

1

After disconnecting the power, lift the top unit, then

cover the waterproof lid onto the upper plug connector.

Rinse the lower part of the top unit, the overflow sensor,

the blade, and the inner side of the pot.

2 Use a cleaning pad to remove the residues which left

on the lower part of top unit, the overflow sensor, and

the blade .

3

Use a dry cloth to clean the top unit handle, control

panel, upper plug, upper plug connector, base, and power

cord connector. The outside of the pot can be cleaned

with a damp cloth .

Easy clean

•

Promptly clean the residue on the appliance; otherwise,

the residue will dry up and stick on the appliance, and

this become difficult to remove. When this happens, you

can use the easy clean function to heat and soak the

inner side of the pot and clean the appliance easier.

•

To prevent the residue from smelling, cleaning the

appliance within 10 hours after use.

1

Pour water into the pot. Make sure that water level is

between MAX (the maximum level indication) and MIN

( the minimum level indication ) .

2

Put the top unit into the pot. Make sure that the upper

plug is correctly inserted into the connector.

3

Open the power connection cover, insert the power

cord, and connect the power.

»

The indicators flash in cycle, indicating that the power

is connected .

4

Press Easy Clean.

»

The Easy Clean indicator lights up and sounds once,

indicating that the easy clean function starts.

»

After about 8 minutes, you will hear 6 beeps and the In

Progress

indicator will turn off, indicating that the easy

clean function is complete .

5

Clean the appliance as instructed in the “Cleaning” section.

Product

information

Motor power: 150 W

Heating power: 900 W

Dimensions (L x W x H):

•

Soymilk maker: 239.1 x 176.2 x 310.3 mm

•

Packaging: 230 x 230 x 345 mm

Weight

•

Net weight: 2.3 kg

•

Gross weight: 3.1 kg

Capacity: 1000 – 1300 ml (for 2-4 servings)

For rated voltage and frequency information, refer to

the typeplate on the product.

Product information is subjected to change without

prior notice.

Recycling

Important safety instructions

Read this user manual carefully before you use the

appliance, and save the user manual for future reference.

Before processing:

•

Before you insert the plug into the power outlet, make

sure that the appliance is assembled correctly.

•

Make sure that your hands are dry before you insert

the plug into the power outlet.

•

Before you connect the appliance to the power, make

sure that the voltage indicated on the bottom of theappliance corresponds to the local power voltage .

•

This appliance can only be used with a grounded plug.

Make sure that the plug is firmly inserted into the

power outlet.

•

Never connect this appliance to a timer switch, to

avoid a hazardous situation.

•Make sure that you clean the appliance before use ( see

the “Cleaning before first use” section).

•Do not use this appliance to heat up soymilk or other

liquid foods.

•

Never use the appliance for dry heating.

•

Never add contents (including water) above MAX

(the maximum level indication) or below MIN (the

minimum level indication ) .

•

If the power cord, the plug, or other parts are damaged,

do not use the appliance .

•

If the power cord is damaged, you must have it

replaced by Philips, a service center authorized by

Philips or similarly qualified persons to avoid a hazard.

•

Do not replace parts of the appliance yourself.

•

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instructions concerning use of the appliance by a

person responsible for their safety.

•

For their safety, do not allow children to play with the

appliance.

•Make sure that the water you add into the soymilk

maker is warm in ambient temperature.

•

This appliance is intended for household use only.

During processing :

•Do not use this appliance on an unstable or uneven

surface.

•Keep the appliance and its power cord out of the

reach of children .

•

Never let the appliance run unattended.

•

Be careful when lifting the top unit in upright position,

keep a good distance from steam to avoid burns or

scalding .

•

Do not touch the steam or the metal parts of the

appliance, to avoid burns or scalding.

•

Do not disconnect the power cord or remove the top

unit before processing is complete.

•

If you have to stop processing, disconnect the power

cord before you perform other operations.

•If there is a power outage no less than 3 minutes after

start processing, do not immediately restart the soymilk

maker. Empty the contents in the soymilk maker, and

then put in new contents before restarting. Otherwise,

the contents will stick to the pot or overflow, or the

appliance will set off a long alarm .After processing :

•

Disconnect the power before you continue other

operations.

•

Disconnect the power and remove the power cord

before cleaning or disassembling this appliance .

•

To prevent steam scalding, keep a certain distance from

the soymilk maker before you lift the top unit.

•

The blade on the top unit is sharp. Be careful not to

cut yourself or others.

•

To prevent a short circuit or an electric shock,

•do not use water to rinse the outside of the pot unit

or top unit (including the top unit handle, control

panel, upper plug, upper plug connector, and the

power cord connector) and keep them away from

drip or splash ;

•

do not immerse the top unit in water;

•

do not immerse the base of the soymilk maker in

water.

•

Use a microwave oven to heat up cold soymilk. Do not

use this appliance to heat it, as the contents will stick to

the inner side of the pot.

•

Some foods may discolor the overflow sensor. This is

perfectly normal .

•

Store the power cord in a cool and dry place.

•

To prevent an electric shock, do not use the power

cord to connect other appliances .

Electromagnetic Fields (EMF)

•This Philips soymilk maker complies with all standards

regarding electromagnetic fields (EMF). If handled

properly and according to the instructions in this user

manual, the appliance is safe to use based on scientific

evidence available today.

1

Overview

Reproduction in whole or in part is prohibited

without the written consent of the copyright owner.

Trademarks are the property of Koninklijke Philips

Electronics N.V. or their respective owners.

All rights reserved.

© 2012 Koninklijke Philips Electronics N.V.

UM  Lea  et_HD2072-73TWWK1245. 34241 210 12401

Cleaning before

first use

2

Method 1

1

Pour boiling water into the pot, put the top unit

into it, then soak for 10 minutes.

2

Clean the appliance (see the “Cleaning” section)

Method 2

1

Follow the instructions in the “Make soymilk”

section .

2

Pour the soymilk away when it is done, and then

clean the appliance (see the “Cleaning” section).

Do not throw away the appliance with the

normal household waste at the end of its life,

but hand it in at an official collection point for

recycling. By doing this, you help to preserve

the environment.

Recipes

For more recipes, you can visit Philips MyKitchen website www.philips.com/kitchen

Soymilk

RecipeIngredientsCooking

Soymilk75 g of dry beans (a full cup)

Wash and soak soybeans thoroughly. For details,

see the “Make soymilk” section.

Black bean milk85 g of black beans (a full cup)

Red bean milk90 g of red beans ( a full cup)

Mung bean milk90 g of mung beans ( a full cup)

Five grains soymilk

RecipeIngredientsCooking

Classic five grains soymilk

•

15 g of soybeans (around 1/5 cup)

•

20 g of rice (around 1/5 cup)

•20 g of millet ( around 1/5 cup )

•15 g of oats ( around 1/5 cup )

•10 g of wheat

Soak the soybeans thoroughly, wash the

ingredients. For details, see the “Make five grains

soymilk” section.

Black rice and soybeansmilk

•

50 g of black rice (around 1/2 cup)

•30 g of soybeans ( around 1/2 cup )

•some black sesame seeds

•some sugar

Wash the black rice and black sesame; wash and

soaked the soybeans thoroughly,. For details, see

the “Make five grains soymilk” section.

Red bean and millet milk

•

50 g of read beans (around 1/2 cup)

•35 g of millet ( around 2/5 cup )

•some sugar

Wash the red beans and millet and soak

thoroughly. For details, see the “Make five grains

soymilk” section.

Rice and soybeans milk

•

30g of soybeans (around 1/2 cup)

•

50 g of rice (around 1/2 cup)

•some sugar

Wash and soak soybeans thoroughly. Wash rice.

For details, see the “Make five grain soymilk”

section .

Pumkin soybeans milk

•

35 g of soybeans (around 1/2 cup)

•35 g of pumpkin ( around 1/2 cup )

Wash the soybeans and soak thoroughly. Remove

the pumpkin skin and cut the pumpkin into 1

cm cubes. For details, see the “Make five grains

soymilk” section.

Sweet potato andsoybean milk

•40 g of sweet potato ( around 1/2 cup )

•35 g of soybeans ( around 1/2 cup )

Wash the soybeans and soak thoroughly. Remove

the sweet potato skin and cut the sweet potato

into 1 cm cubes. For details, see the “Make five

grains soymilk” section.

Black rice, soybeans, and

walnut milk

•

60 g of black rice (around 2/3 cup)

•30 g of soybeans ( around 1/2 cup )

•flesh of 5 walnuts

•some sugar

Wash black rice and the soybeans. Chop walnut

flesh into small pieces. For details, see the “Make

five grains soymilk” section.

Mung bean and barley

paste

•

35 g of barley (around 2/5 cup)

•35 g of mung beans ( around 2/5 cup )

•

20 g of rice (around 1/5 cup)

•10 g of oats ( around 1/5 cup )

Wash the ingredients. For details, see the “Make

five grains soymilk:” section.

Walnut and cashew paste

•

35 g of rice (around 2/5 cup)

•35 g of millet ( around 2/5 cup )

•flesh of 5 cashews

•flesh of 5 walnuts

•5-10 chinese dates ( with stones removed )

•5-10 longans ( with stones removed )

•some sugar

Wash rice and millet. Chop walnut flesh, chinese

dates, and longans into small pieces. For details,

see the “Make five grains soymilk” section.

Rice paste

RecipeIngredientsCooking

Cashew paste

•

150 g of cashews

•

some milk and crystal sugar

Brown the cashews and make sure they are

around 1cm in size. Put it into the pot. Add

water up to the middle of MAX and MIN

. After

connecting to the power, press Select to select

Rice Paste. Press Start to start processing. Once

done, the appliance will sound. Pour the cashew

paste to the soymilk cup and serve. Finally, add

some milk and sugar to taste .

Complete nutritious rice

paste

•

35 g of rice (around 1/2 cup)

•15 g of millet ( around 1/5 cup )

•10 g of black sesame seeds

•10 peanuts ( with shells removed )

•flesh of walnuts

•5 chinese dates ( with stones removed )

Wash rice and millet. Chop walnut flesh into

small pieces. For details, see the “Make rice paste”

section .

Barley and lily rice paste

•

35 g of barley (around 2/5 cup)

•

35 g of rice (around 2/5 cup)

•20 g of fresh lily bulbs

•some sugar

Wash the barley and rice. Wash and chop fresh

lily bulbs into small pieces. For details, see the

“Make rice paste” section.

Chinese  yam  ( shān  yào ) and chinese date ricepaste

•

50 g of rice (around 1/2 cup)

•30 g of chinese yam

•5-10 chinese dates ( with stones removed )

•

some crystal sugar

Wash the chinese dates and rice. Remove the

skin of the chinese yam and cut it into 1 cm

cubes. For details, see the “Make rice paste”

section .

RecipeIngredientsCooking

Sweet potato andpumpkin rice paste

•30 g of sweet potato ( around 1/2 cup )

•20 g of pumpkin ( around 1/3 cup )

•

35 g of rice (around 1/3 cup)

•35 g of millet ( around 1/3 cup )

Wash millet and rice. Remove the skin of sweet

potato and pumpkin and cut them into 1 cm

cubes. For details, see the “Make rice paste”

section .

Peanut paste

•

200 g of peanuts (with shell removed)

•

50 g of rice

•

some milk and crystal sugar

Brown the peanuts and make sure they are

around 1cm in size. Wash rice. Put the peanuts

into the pot first, then the clean rice. Add water

up to the middle of MAX and MIN

. After

connecting to the power, press Select to select

Rice Paste

. Press

Start

to start processing. Once

done, the appliance will sound. Pour the peanut

paste to the soymilk cup and serve. Finally, add

some milk and sugar to taste .

Almond paste

•

70 g of almonds

•

30 g of rice

•

some milk and crystal sugar

Brown the almonds and make sure they are

around 1cm in size. Wash rice. Put the almonds

into the pot first, then the clean rice. Add water

up to the middle of MAX and MIN

. After

connecting to the power, press Select to select

Rice Paste

. Press

Start

to start processing. Once

done, the appliance will sound. Pour the almond

paste to the soymilk cup and serve. Finally, add

some milk and sugar to taste .

Sesame paste

•

125 g of black sesame seeds

•25 g of white sesame seeds

•

50 g of rice

•

some milk and crystal sugar

Brown the black sesame seeds and the white

sesame seeds. Wash rice. Put both the black and

white sesame seeds into the pot first then put

the clean rice. Add water up to the middle of

MAXandMIN

. After connecting to the power,

press Select to select Rice Paste. Press

Start

to

start processing. Once done, the appliance will

sound. Pour the sesame paste to the soymilk

cup and serve. Finally, add some milk and sugar

to taste .

Walnut paste

•

180 g of walnuts

•

50 g of rice

•

some milk and crystal sugar

Brown the walnuts and make sure they are

around 1cm in size. Wash rice. Put the walnuts

into the pot first, then put the clean rice. Add

water up to the middle of MAX and MIN

. After

connecting to the power, press Select to select

Rice Paste

. Press

Start

to start processing. Once

done, the appliance will sound. Pour the walnut

paste to the soymilk cup and serve. Finally, add

some milk and sugar to taste .

Fruit/veggie drink

RecipeIngredientsCooking

Banana milkshake

•

400 g of banana

•300 ml of milk

Remove the skin of the bananas and cut them

into 1 cm cubes. For details, see the “Make fruit/

veggie drink” section.

Cucumber juiceOne cucumber (around 200 g)Cut the cucumber into 1 cm cubes. For details,

see the “Make fruit/veggie drink” section.

Pureed soup

RecipeIngredientsCooking

Tremella, lotus seed, and

chinese date puree

•

Two pieces of tremella (around 10 g)

•35 g of lotus seeds ( around 1/2 cup )

•30 g of chinese dates ( around 1/2 cup )

Wash tremella and soak thoroughly. Cut

tremellas and Chinese dates into small pieces.

For details, see the “Make vegetable puree soup”

section .

Corn juice (HD2073 only)

RecipeIngredientsCooking

Corn juice300-350 g of fresh corns (around 5-6 cups)Wash corn. For details, see the “Make corn juice”

section .

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve

the problem with the information below, contact the Philips Consumer Care Center in your country.

ProblemPossible causeSolution

The indicators do not

light up .

The upper plug is not plugged correctly.Make sure that the top unit is put into the pot

correctly.

Too much ingredient is added.Put proper quantity of ingredient evenly at

the bottom of the pot as instructed.

There is water in the top unit or the

indicators are broken.

Contact the Philips Consumer Care Center.

The indicators light up but

the appliance does notwork .

You do not press Start.Press Start.

The power is disconnected during processing.Follow the instructions in this user manual.

The appliance is broken.Contact the Philips Consumer Care Center.

Processing will not stop.The appliance is broken.Contact the Philips Consumer Care Center.

The buttons do not work.The appliance is broken.Contact the Philips Consumer Care Center.

The beans or rice is notground well .

The voltage is too low.Use a household power regulator.

Too many beans are added.Put proper quantity of ingredients as

instructed in the “Use the appliance” section.

Insufficient water is added.Make sure that the water level is between

MAX( the maximum level indication ) and

MIN( the minimum level indication ) .

The machine is broken.Contact the Philips Consumer Care Center.

Overflow.A wrong function was selected.Select a correct function.

Soymilk is too diluted or too many beans are

added .

Put proper quantity of ingredient as instructed

in the “Use the appliance” section.

The water level is above MAX (the maximum

level indication) and MIN (the minimum level

indication ) .

Make sure that the water level is between

MAX( the maximum level indication ) and

MIN( the minimum level indication ) .

The appliance is broken.Contact the Philips Consumer Care Center.

The overflow sensor is not cleaned.Clean the overflow sensor.

ProblemPossible causeSolution

The time taken to processsoymilk is longer than

instructed, but other

functions work well .

The voltage is too low.User a household power regulator.

The water temperature is too low.Add warm water in ambient temperature.

Food is burnt.A wrong function is selected.Select a correct function.

The inner side of the pot was not cleaned.Clean the inner side of the pot.

Insufficient water is added.Make sure that the water level is between

MAX( the maximum level indication ) and

MIN( the minimum level indication ) .

Too much ingredient is added.Put proper quantity of ingredient as instructed

in the “Use the appliance” section.

The beeps occur before

soymilk is ready.

Too much water or ingredient is added.

•

Put proper quantity of ingredient as

instructed in the “Use the appliance”

section .

•Make sure that the water level is between

MAX( the maximum level indication ) and

MIN( the minimum level indication ) .

The appliance is broken.Contact the Philips Consumer Care Center.

The sea level of your region is too high.This appliance can only be used in regions no

more than 2000m above mean sea level.

The appliance begins

stirring once you press

any button .

The appliance is broken.Contact the Philips Consumer Care Center.

Guarantee and

service

If you have a problem, need service, or need

information, see www.philips.com/support or contact

the Philips Consumer Care Center in your country.

aHandle of the top unitbControl Panel

•Functional

buttons

•Select

•Start

•Easy Clean

•

Indicators

•Soymilk

•

Five Grains Soymilk

•Rice Paste

•

Fruit/ Veggie Drink

•Pureed Soup

•

Corn Juice ( HD2073 only )

•

In Progress

•

Keep Warm

•Easy Clean

c

Overflow sensor – Monitor soymilk and prevent

overflowing

dBladee

Lower part of the top unit

fUpper plugg

Pot unit

hBasei

Power connection cover

j

Power cord connector

k

Pot handle

l

Waterproof lid for coupling – prevent drip or

splash, which makes washing safer

mUpper plug connectorgabcdfehikjmlStartIn Progressഌට ໎ഌට ໎35Corn JuiceSoymilk

Five Grains

SoymilkRicePaste

Fruit/

Ve

ggie

DrinkPureed SoupSelect987

25’

BEEP26 ’4 ’

Source: https://dvn.com.vn/
Category : Philips

Alternate Text Gọi ngay