35″ Acer Predator X35 – Specifications
The year in which this model was announced.
Name of the series, which the model belongs to.
Size class
Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.
35 in
(inches)
Diagonal
Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen.
889 mm
(millimeters)
88.9 cm
(centimeters)
35 in
(inches)
2.9167 ft
(feet)
Width
Approximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio.
819.408 mm
(millimeters)
81.9408 cm
(centimeters)
32.2602 in
(inches)
2.6883 ft
(feet)
Height
Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.
345.888 mm
(millimeters)
34.5888 cm
(centimeters)
13.6176 in
(inches)
1.1348 ft
(feet)
Radius of curvature
There are curved displays, whose curve is part of a circumference (arc). In order to give more precise information about the curve of the screen, often the manufacturer provides data about the radius of this circumference. The smaller the radius, the larger the screen curve.
1800 mm
(millimeters)
180 cm
(centimeters)
70.8661 in
(inches)
5.9055 ft
(feet)
Panel manufacturer
Name of the manufacturer of the display panel.
AU OptronicsPanel model
Information about the model of the panel used.
M350QVR01.7Panel type
There are various panel technologies. Each has its own specific features – viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used.
AMVAPanel bit depth
The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively.
10 bits (8 bits + FRC)FRC
Frame Rate Control (FRC) is a method, which allows the pixels to show more color tones. With quick cyclic switching between different color tones, an illusion for a new intermediate color tone is created. For example, by using FRC, a 6-bit display panel is able to show 16.7 millioin colors, which are typical for 8-bit display panels, and not the standard 262200 colors, instead. There are different FRC algorithms.
YesColors
The maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC.
1073741824 colors
30 bitsAspect ratio
The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10.
2.389:1Resolution
Information about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image.
3440 x 1440 pixelsPixel pitch
The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen.
0.238 mm
(millimeters)
0.0238 cm
(centimeters)
0.0094 in
(inches)
0.0008 ft
(feet)
Pixel density
Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.
106 ppi
(pixels per inch)
41 ppcm
(pixels per centimeter)
Display area
The percentage of the approximate area, taken by the active part of the screen, to the total front area.
89.2 %
(percent)
Backlight
The backlight is the source of light of the LCD display panels. The type of backlight determines the image quality and the color space of the display. There are various backlights such as CCFL, LED, WLED, RGB-LED, and etc.
Direct LED (Full-Array Local Dimming)sRGB
sRGB is a color space, developed jointly by Hewlett-Packard and Microsoft in 1996. It is used in different devices such as printers, displays, TV sets, cameras, etc. The sRGB color space covers about 72% of the NTSC color space.
100 %
(percent)
Adobe RGB (1998)
Adobe RGB (1998) is a color space, developed by Adobe Systems in 1998. It has a wider gamut than the sRGB (mainly in the cyan-green range of colors) and is widely used in professional printing.
82 %
(percent)
DCI P3
DCI P3 is a color space, introduced in 2007 by the SMPTE. It is used in digital cinema and has a much wider gamut than the sRGB.
90 %
(percent)
Brightness
Information about the brightness of the screen. It is measured in candela per square metre (cd/m²).
600 cd/m²
(candela per square meter)
Peak brightness
Often even a higher peak luminance can be achieved under certain conditions. For example, when a smaller area/APL of the display is used for showing a bright object, when a bright object is displayed for a short time, etc.
1000 cd/m²
(candela per square meter)
Static contrast
The static contrast shows the ratio between the brightest and the darkest color, which the display can reproduce simultaneously, for example, within one and the same frame/scene.
2500 : 1Dynamic contrast
The dynamic contrast shows the ratio between the brightest and the darkest color, which the display can reproduce over time, for example, in the course of playing a video.
100000000 : 1HDR
HDR expands the contrast ratio (peak luminance and minimal black levels) and color palette to achieve more details across the whole image – from the darkest parts to the brightest ones, which results in more realistic and life-like image.
HDR10
DisplayHDR 1000Horizontal viewing angle
Information about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality.
178 °
(degrees)
Vertical viewing angle
Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.
178 °
(degrees)
Minimum response time
Information about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G).
2 ms
(milliseconds)
0.0020 s
(seconds)
Input lag
Desktop monitors and smart TVs experience a latency/lag in visualizing the information. The time in milliseconds that the display needs to visualize the signal input.
5 ms
(milliseconds)
0.0050 s
(seconds)
Local dimming – 512 zones
