ASUS GeForce GTX 1060 6GB Strix Graphics Card Review

We discovered this past summer that NVIDIA’s GeForce GTX 1060 is quite an effective card at its suggested price of ~$249 (6GB model), delivering superb 1080p performance, and solid 1440p performance. As impressive as it was, though, there’s always a little room for improvement, right? ASUS thinks so, and it has its Strix edition to help prove it.

Whereas the reference Founders Edition of the GTX 1060 features a leaf-blower style fan under a closed metal shroud, ASUS offers a beefed-up fin array with its Strix and tops the open shroud with three fans. That makes the Strix edition bulkier overall versus the Founders Edition, but as we’ll see later, the trade-off of space is worth it.

The GTX 1060 Strix supports a couple of predefined modes, with the shipping one being “Gaming”. In that mode, the card supports a GPU Boost clock of 1847MHz. When the GPU TweakII software is installed, “OC Mode” can be used instead, to increase the clock further, to 1873MHz. In the real-world, the top-end of each value will be even higher, something I’ll take a look at on the final page. The important thing to note is that the Strix edition is an overclocked GTX 1060, so out-of-the-gate, it’ll perform much better than a Founders Edition – as we’ll see soon.

Time for some hardware porn:

ASUS equips the GTX 1060 Strix with a DVI-D port, dual HDMI ports, and dual DisplayPorts. While NVIDIA’s design sports a 6-pin power connector, ASUS includes an 8-pin for the sake of possibly improved stability and improved overclocking potential.

As seen in one of the shots above, Strix also includes a backplate, and unlike most, it actually adds to the style of the card. Overall, the entire card is great-looking; it’s not flashy, and would look good in any build. OK – perhaps “not flashy” is incorrect phrasing, as under the shroud, a customizable LED can be found. With downloadable software called Aura, you can change the LED mode and color – great for those wanting to add a bit of pizzazz to their build. Don’t want color? You can turn the LED feature off entirely.

If you’re indifferent to the color of the LED, but use a windowed PC so that you can see the card, you can also use a feature that adjusts the card’s color based on temperature: green for modest temperatures, and yellow/red for peaked temperatures.

NVIDIA GeForce Series
Cores
Core MHz
Memory
Mem MHz
Mem Bus
TDP

TITAN X
3584
1417
12288MB
10000
384-bit
250W

GeForce GTX 1080
2560
1607
8192MB
10000
256-bit
180W

GeForce GTX 1070
1920
1506
8192MB
8000
256-bit
150W

GeForce GTX 1060
1280
≤1700
6144MB
8000
192-bit
120W

As seen in the table above, the GTX 1060 sits at the bottom of NVIDIA’s current line-up, although that’s not a bad thing considering it’s still a midrange card (the GTX 1050 is rumored to make an appearance soon). So what’s that mean in performance terms? In our opinion:

NVIDIA GeForce Series
1080p
1440p
3440×1440
4K

TITAN X
Overkill
Overkill
Excellent
Great

GeForce GTX 1080
Overkill
Excellent
Excellent
Good

GeForce GTX 1070
Excellent
Great
Good
Poor

GeForce GTX 1060
Great
Good
Poor
Poor

As a “Great” 1080p card, the GTX 1060 will hit 60 FPS pretty effortlessly in most of today’s games, although it might not be common to be able to top-out a game’s graphics settings at that resolution with future titles. “Good” for 1440p means that compromises will have to be made in most of today’s current games in order to hit 60 FPS.

What that means for the Strix is that those values would be even more emphasized. It’d take a lot more than a clock boost to upgrade any of these values, though.

Testing Notes

When we need to build a test PC for performance testing, “no bottleneck” is the name of the game. While we admit that few of our readers are going to be equipped with an Intel 8-core processor clocked to 4GHz, we opt for such a build to make sure our GPU testing is as apples-to-apples as possible, with as little variation as possible. Ultimately, the only thing that matters here is the performance of the GPUs, so the more we can rule out a bottleneck, the better.

That all said, our test PC:

Framerate information for all tests – with the exception of certain time demos and DirectX 12 tests – are recorded with the help of Fraps. For tests where Fraps use is not ideal, I use the game’s built-in test (the only option for DX12 titles right now). In the past, I’ve tweaked the Windows OS as much as possible to rule out test variations, but over time, such optimizations have proven fruitless. As a result, the Windows 10 installation I use is about as stock as possible, with minor modifications to suit personal preferences.

In all, I use 8 different games for regular game testing, and 3 for DirectX 12 testing. That’s in addition to the use of three synthetic benchmarks. Because some games are sponsored, the list below helps oust potential bias in our testing.

(AMD) – Ashes of the Singularity (DirectX 12)
(AMD) – Battlefield 4
(AMD) – Crysis 3
(AMD) – Hitman (DirectX 12)
(NVIDIA) – Metro: Last Light Redux
(NVIDIA) – Rise Of The Tomb Raider (incl. DirectX 12)
(NVIDIA) – The Witcher 3: Wild Hunt
(Neutral) – DOOM
(Neutral) – Grand Theft Auto V
(Neutral) – Total War: ATTILA

If you’re interested in benchmarking your own configuration to compare to our results, you can download this file (5MB) and make sure you’re using the exact same graphics settings. I’ll lightly explain how I benchmark each test before I get into each game’s performance results.