🔐ASUS TUF-AX3000 Default Password & Login, Firmwares and Reset instructions | RouterReset

Hard reset instructions
for ASUS TUF-AX3000

If your TUF-AX3000 router is not working as it should, dropping connections or not
being
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you’ve forgotten the password or
misconfigured it and can’t get access anymore.
Your can reset your ASUS TUF-AX3000 in the following way(s):

Through the web-interface

1. Open your browser and navigate to the default gateway ip (check default settings below)
2. Sign in to the web-interface with the username and password you have selected, or try the defaulr username and password (check default settings below)
3. Under the advanced settings menu, select administration
4. Find the link “Restore/Save/Upload Setting“
5. Beside Factory default click on Restore

6. If prompted, click ok

With the reset button on the router

1. Locate the reset button on the backside of your unit
2. with a sharp object, e.g. a paperclip or pencil, press and hold the reset button for 5s or until the power led starts flashing

The 30-30-30 reset

If the above instructions don’t work you can always try the 30-30-30 reset as follows:

1. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper
   clip
   or something sharp)
2. While holding the reset button pressed, unplug the power of the router and hold the
   reset
   button for 30 seconds
3. While still holding the reset button down, turn on the power to the unit again and hold
   for
   another 30 seconds.

If the above instructions don’t work you can always try the 30-30-30 reset as follows:

This process usually works for resetting any router to it’s factory setting.

Note: It is worth reading more about
how to reset routers with the 30 30 30 reset and what the risks and
considerations
are when resetting your router this way, instead of just rebooting it.