Anchorage, Alaska Map Art – City Prints

Celebrate some of the best cities the U.S. has to offer with fine art maps from City Prints. Illustrated in bold colors inspired by their city flags, these prints look like modern art but also represent the places you’re most passionate about. City Prints are truly the perfect personalized gift.

This City Print was designed and printed at City Prints HQ in Charlotte, NC. It’s printed on high-quality 105# Stardream Pearlescent. This heavy paper stock has a subtle metallic shimmer that gives your print a unique visual effect.

We have four finishing options in addition to our 12″ x 12″ unframed prints:

1. 23″ x 23″ Matt + Frame (Recommended)
Our 23″ x 23″ frames have a black 1.75” wide genuine-wood molding with an 11.75” x 11.75” measurement inside the mat. The print is enhanced with a soft white acid-free mat, which is bevel cut and placed on top of the print. The print and matt are protected by a premium crystal-clear acrylic overlay. The back of the frame is sealed with a dust cover for added protection. Industrial silver hanging hardware is bolted to the back of the frame – it’s ready to hang on your wall. (pictured below)

2. 16.5″ x 16.5″ Frame
Our 16.5″ x 16.5″ frames have a black 2.75” wide heavy polystyrene molding. We choose to mount the prints without an acrylic overlay, which shows off the unique properties of our paper stock when it hits the light. The back of the frame is sealed with a dust cover for added protection. Industrial silver hanging hardware is bolted to the back of the frame – it’s ready to hang on your wall. (pictured below)

3. 14″ x 14″ or 30″ x 30″ Gallery-Wrapped Canvas
We print directly on high-quality canvas, then stretch the image over heavy gauge 1.5″ deep wood stretcher bars. Corners are braced with additional bars and heavy hardware is attached to the back so your piece is ready to hang. (pictured below)

4. 23″ x 23″ Wood Art Panel
We print using fine UV ink on a sheet of 1/2″ birch plywood. Then we distress the ink to achieve a weathered look before carving board grooves within the panel. The frame out the back of the piece with 1″ x 2″ lumber, then add heavy hardware and wire so it’s ready to hang. Each wood art panel is made to order, so please allow one to two weeks for your piece to ship. If you need a short turnaround, please contact us and we’ll see if we can make it happen.

We can print on virtually any material at any size. If you don’t see the option that you’d like, please contact us and we’d be happy to quote a custom project for you.

You can also get this print on a custom set of wood coasters, on glassware, or within jewelry, like a pendant or a set of cufflinks. Click here for more information on our personalized products.