N736PA | This Day in Aviation

27 March 1977: The deadliest accident in the history of aviation occurred when two Boeing 747 airliners collided on the runway on the island of Tenerife in the Canary Islands. 583 people died.

A terrorist incident at Gran Canaria International Airport (LPA) on the island of Gran Canaria resulted in the airport being closed for flight operations. This forced many trans-Atlantic airliners to divert to the smaller Los Rodeos Airport (TFN) on Tenerife. The ramp and taxiways at Los Rodeos were congested and refuelers were overwhelmed by the increased traffic, which led to many delays.

Los Rodeos Airport has only one runway, Runway 12/30, with a parallel taxiway and four short taxiways joining the two.

Pan American World Airways’ Flight 1736, a Boeing 747-121, FAA registration number N736PA, named Clipper Victor ¹ was ready for takeoff with 380 passengers and crew, but had to “back taxi” on Runway 12 (“One-Two”) because the parallel taxiway was jammed with airplanes. The airliner proceeded east-southeast, intending to exit the runway to the parallel taxiway after passing by the congestion around the terminal.

Also on the runway was Koninklijke Luchtvaart Maatschappij (KLM) Flight 4805, a Boeing 747-206B, PH-BUF, named Rijn (“Rhine”). The KLM jumbo jet had 248 passengers and crew members on board. Flight 4805 had back-taxied for the entire length of Runway 12, then made a 180° turn to align itself with Runway 30, the “active” runway.

Weather at the time of the accident was IFR, with low clouds and fog. Visibility on the runway was restricted to about 1,000 feet (305 meters). Takeoff rules required a minimum of 2,300 feet (701 meters). What happened next was a misunderstanding between the air traffic controllers and the crew of both airliners.

The control tower instructed KLM 4805 to taxi into position on Runway 30 (“Three-Zero”) for takeoff, and to hold there for release. The Pan Am airliner was told to taxi off the runway and to report when clear. The tower controllers could not see either airliner because of the fog, and their flight crews could not see each other.

The aircraft commander of the Dutch airliner, that company’s Chief Pilot and Chief Flight Instructor, Captain Jacob Veldhuyzen Van Zanten, apparently misunderstood what was occurring and radioed to the tower that he was taking off. He then accelerated.

The crew in the Pan Am airliner heard the KLM pilot report that he was taking off, immediately turned left and ran the engines up to full throttle in order to try to get off the runway. With the KLM 747 accelerating through the fog, its flight crew belatedly realized that the other airliner was still ahead of them. Too late to stop, they applied full power and pulled the nose up trying to takeoff. The tail of their airplane actually dragged over sixty feet (18 meters) on the runway because its extreme nose up angle.

KLM 4805 lifted off about 300 feet (91 meters) from Pan Am 1736, and because of the high angle of attack, its nose wheel actually passed over American airliner’s fuselage, but the rest of the Dutch airplane hit at 140 knots (259 kilometers per hour). Clipper Victor was ripped in half, caught fire and exploded. Rijn crashed about 250 yards (229 meters) down the runway, and it also caught fire and exploded.

All 248 people aboard the Royal Dutch Airlines airplane were killed. Miraculously, there were 61 survivors from the Pan Am Clipper, including the co-pilot, but the remaining 335 died.

The 747-100 series was the first version of the Boeing 747 to be built. It was operated by a flight crew of three and was designed to carry 366 to 452 passengers. It is 231 feet, 10.2 inches (70.668 meters) long with a wingspan of 195 feet, 8 inches (59.639 meters) and overall height of 63 feet, 5 inches (19.329 meters). The interior cabin width is 20 feet (6.096 meters), giving it the name “wide body.” Its empty weight is 370,816 pounds (168,199 kilograms) and the Maximum Takeoff Weight (MTOW) is 735,000 pounds (333,390 kilograms).

The 747-100 is powered by four Pratt & Whitney JT9D-7A high-bypass ratio turbofan engines. The JT9D is a two-spool, axial-flow turbofan engine with a single-stage fan section, 14-stage compressor (11 high- and 3 low-pressure stages) and 6-stage turbine (2 high- and 4 low-pressure stages). The engine is rated at 46,950 pounds of thrust (208.844 kilonewtons), or 48,570 pounds (216.050 kilonewtons) with water injection (2½-minute limit). This engine has a maximum diameter of 7 feet, 11.6 inches (2.428 meters), is 12 feet, 10.2 inches (3.917 meters) long and weighs 8,850 pounds (4,014 kilograms).

The 747-100 has a cruise speed of 0.84 Mach (555 miles per hour, 893 kilometers per hour) at 35,000 feet (10,668 meters). The maximum certificated operating speed is 0.92 Mach. The airliner’s maximum range is 6,100 miles (9,817 kilometers).

The Boeing 747 has been in production for 48 years. More than 1,520 have been delivered to date. 205 of these were the 747-100 series. The U.S. Air Force has selected the Boeing 747-8 as the next presidential transport aircraft.

¹ Pan American World Airways’ Boeing 747 Clipper Victor was the very first Boeing 747 in service. It made its first commercial passenger flight, New York to London, 22 January 1970. Another airliner, Clipper Young America, was scheduled to  make that flight but suffered mechanical problems shortly before departure. Clipper Victor was substituted, but Pan Am changed the airliner’s name to Clipper Young America. On 2 August 1970, N736PA was hijacked to Cuba, and afterwards, to avoid the negative publicity, the name of the 747 was changed back to Clipper Victor.

© 2019, Bryan R. Swopes

Alternate Text Gọi ngay