By placing an Apple AirPort Express after Vilfo, your AirPort Express can be used to extend the wireless network of Vilfo.

Turning your Apple AirPort Express into an access point

1. Connect a network cable to the WAN port on your Apple AirPort Express and the LAN port on your Vilfo

2. Start the AirPort Utility application

3. Wait until the AirPort Utility program finds the AirPort Express and click the Edit button to access configuration

4. Go to the Inter tab of your AirPort Express

5. Verify that Connect Using is set to DHCP so that your AirPort Express get an IP address from Vilfo

6. Go to the Network tab

7. Under Network Mode, select Off (Bridge Mode)

8. Save your settings

Note! If you choose to use your Apple AirPort Express as an access point, you may want to disable the Wireless network in Vilfo.