First Edition / June 2015
Side features
Rear features
Model: ASUS_Z00VD
Charging your ASUS Phone
To charge your ASUS Phone:
Rear camera
Audio jack
Before you start, ensure that you have read all the safety
information and operating instructions in this User Guide
to prevent injury or damage to your device.
Camera flash
1.
Connect the USB connector into the power adapter’s
USB port.
2.
Connect the other end of the micro USB cable to
your ASUS Phone.
3.
Plug the power adapter into a wall socket.
Volume key
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Power key
Front features
Rear cover
User Guide
IMPORTANT!
Front camera
Receiver
•
When using your ASUS Phone while it is plugged to
a power outlet, the grounded power outlet must be
near to the unit and easily accessible.
•
When charging your ASUS Phone through your
computer, ensure that you plug the micro USB
cable to your computer’s USB 2.0 / USB 3.0 port.
Avoid charging your ASUS Phone in an
environment with ambient temperature of above
35oC (95oF).
Groove
Micro USB port
Sensor
Speaker
Microphone
•
NOTE: Pry open the rear cover from the groove.
Touch screen
display
NOTES:
•
Remove the rear cover to display the dual micro
SIM and microSD card slots.
•
The micro SIM card slots support WCDMA and
GSM/EDGE network bands.
The microSD card slot supports microSD and
microSDHC card formats.
•
NOTES:
•
Use only the power adapter that came with your
device. Using a different power adapter may
damage your device.
•
Using the bundled power adapter and ASUS Phone
signal cable to connect your ASUS Phone to a
power outlet is the best way to charge your ASUS
Phone.
•
Use the ASUS 5W power adapter and ASUS USB
cable to get the best fast-charge experience when
your ASUS Phone is in sleep mode.
The input voltage range between the wall outlet and
this adapter is AC 100V - 240V. The output voltage
of the micro USB cable is +5.2V 1A, 5W.
Touch keys
•
E10925
Installing a micro SIM card
4.
Insert the micro SIM card into one of the micro SIM
card slots.
2.
To install a micro SIM card:
1.
Pry the cover loose
and then pull the
rear cover off.
Micro SIM card 2
IMPORTANT: Use only a micro SIM card on your ASUS
Phone. A trimmed SIM card may not properly it into and
may not be detected by your ASUS Phone.
Your ASUS Phone is equipped with a high performance
non-detachable Li-Ion battery. Observe the maintenance
guidelines for a longer battery life.
Remove the battery.
NOTE: Both micro SIM card slots support 3G/2G
WCDMA network bands. But only one micro SIM card
can connect to 3G WCDMA service at a time.
Pry the cover loose
and then pull the
rear cover off.
Installing a microSD card
1.
3.
Remove the battery.
Insert the microSDcard into the microSD card slot.
Locate the groove on
the lower-right corner
of your ASUS Phone.
CAUTION: Do not use sharp tools or solvent on your
device to avoid scratches on it.
•
•
Use only the charger supplied with your ASUS
Phone.
Never pull the charger cord to disconnect it from the
power socket. Pull the charger itself.
Do not remove the non-detachable Li-on battery as
this will void the warranty.
•
•
Avoid charging in extremely high or low temperature.
The battery performs optimally in an ambient
temperature of +5 °C to +35 °C.
Caution
•
Use only ASUS battery. Using a different battery
may cause physical harm/injury and may damage
your device.
•
Do not remove and soak the battery in water or any
other liquid.
•
Never try to open the battery as it contains
substances that might be harmful if swallowed or
allowed to come into contact with unprotected skin.
•
Do not remove and short-circuit the battery, as it may
overheat and cause a ire. Keep it away from jewelry
or metal objects.
•
Do not remove and dispose of the battery in ire. It
could explode and release harmful substances into
the environment.
•
Do not remove and dispose of the battery with your
regular household waste. Take it to a hazardous
material collection point.
•
Do not touch the battery terminals.
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used battery according to the
instructions.
The charger
•
To install a microSD card:
4.
•
Use your ASUS Phone in an environment with
ambient temperatures between -10 °C (14 °F) and
35 °C (95 °F).
The battery
3.
NOTES:
ASUS Phone care
•
Locate the groove on
the lower-right corner
of your ASUS Phone.
Micro SIM card 1
2.
Safety information
Your ASUS Phone is a high quality piece of equipment.
Before operating, read all instructions and cautionary
markings on the (1) AC Adapter.
•
Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs optimally
in an ambient temperature between -10 °C (14 °F)
and 35 °C (95 °F).
•
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required, return
the unit to an authorized service center. If the unit
is disassembled, a risk of electric shock or ire may
result.
•
Do not short-circuit the battery terminals with metal
items.
Operator access with a tool
If a TOOL is necessary to gain access to an OPERATOR
ACCESS AREA, either all other compartments within
that area containing a hazard shall be inaccessible
to the OPERATOR by the use of the same TOOL, or
such compartments shall be marked to discourage
OPERATOR access.
FCC Regulations
RF Exposure Information (SAR)
This mobile phone complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
This phone is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission
of the United States.
This mobile phone has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiated radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
CAUTION! Changes or modiications not expressly
approved by the party responsible for compliance could
void the user‘s authority to operate the equipment.
During SAR testing, this device was set to transmit at
its highest certiied power level in all tested frequency
bands, and placed in positions that simulate RF exposure
in usage against the head with no separation, and near
the body with the separation of 10 mm. Although the SAR
is determined at the highest certiied power level, the
actual SAR level of the device while operating can be well
below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use
only the power required to reach the network. In general,
the closer you are to a wireless base station antenna, the
lower the power output.
The exposure standard for wireless devices employing a
unit of measurement is known as the Speciic Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
This device is complied with SAR for general population
uncontrolled exposure limits in ANSI/IEEE C95.1-1992
and had been tested in accordance with the measurement
methods and procedures speciied in IEEE1528.
For body-worn operation, this device has been tested and
meets the ICNIRP guidelines and the European Standard
EN 62209-2, for use with dedicated accessories. SAR is
measured with this device at a separation of 1.5 cm to
the body, while transmitting at the highest certiied output
power level in all frequency bands of this device. Use of
other accessories which contain metals may not ensure
compliance with ICNIRP exposure guidelines.
Noi, subsemnaii,
ASUSTeK COMPUTER INC.
Productor:
ASUSTeK COMPUTER INC.
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Adres:
Strada PEITOU Nr 150, Li-TE etaj 4, TAIPEI 112, TAIWAN
Authorized representative in Europe:
ASUS COMPUTER GmbH
Reprezentant autorizat în Europa:
ASUS COMPUTER GmbH
Address, City:
HARKORT STR. 21-23, 40880 RATINGEN
Adres, Ora:
Strada HARKORT Nr 21-23, RATINGEN 40880
Country:
GERMANY
ar:
Germania
declarm c urmtorul aparat:
Product name :
ASUS Phone
Nume produs:
Model name :
ASUS_Z00VD
Nume model:
EN 55022:2010 / AC:2011
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
EN 60950-1: 2010 / A12: 2011
EN 60950-1: 2006 / A11: 2009
EN 60065:2002 / A12: 2011
EN 50332-1: 2013
EN 50332-2: 2013
DO NOT throw this product in ire. DO
NOT short circuit the contacts. DO NOT
disassemble this product.
0.497 W/Kg (Body)
Specific Absorption Rate (SAR)
Band
Head
Body
SAR- 10g
SAR- 10g
(W/kg)
(W/kg)
GSM900
0.362
0.497
GSM1800
0.244
0.210
WCDMA Band VIII
0.262
0.348
WCDMA Band I
0.165
0.182
2.4GHz WLAN
0.150
0.028
For irst-time use of a GPS-enabled app on your
device, ensure that you are outdoors to get the
best positioning data.
•
When using a GPS-enabled app on your device
inside a vehicle, the metallic component of the car
window and other electronic devices might affect
the GPS performance.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
We declare that the IMEI codes for this product, ASUS
Phone, are unique to each unit and only assigned to this
model. The IMEI of each unit is factory set and cannot
be altered by the user and that it complies with the
relevant IMEI integrity related requirements expressed
in the GSM standards.
EN 60950-1: 2009 / A1: 2010
EN 60950-1: 2010 / A12: 2011
EN 60950-1: 2006 / A11: 2009
EN 60065:2002 / A12: 2011
EN 50332-1: 2013
EN 50332-2: 2013
Directiva 2009/125/EC-ErP
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009
Regulation (EU) No. 617/2013
Regulation (EC) No. 642/2009
Regulation (EU) No. 617/2013
Ver. 150326
0560
Directiva 2011/65/EU-RoHS
Ver. 150326
Însemnul CE
0560
(EC conformity marking)
(Însemnul de conformitate EC)
Position :
CEO
Poziia:
Name :
Jerry Shen
Nume:
Data declaraiei: 08/06/2015
Anul aplicrii însemnului CE: 2015
Declaration Date: 08/06/2015
Year to begin affixing CE marking: 2015
CEO
Jerry Shen
Semntura: __________
Signature : __________
EC Uygunluk Beyanı
Biz, bu imza altındakiler
Fabricante:
ASUSTeK COMPUTER INC.
Üretici:
Morada:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Adres:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
ASUS COMPUTER GmbH
ASUSTeK COMPUTER INC.
Representante autorizado na Europa:
ASUS COMPUTER GmbH
Avrupa’daki Yetkili:
Morada, Cidade:
HARKORT STR. 21-23, 40880 RATINGEN
Adres, ehir:
HARKORT STR. 21-23, 40880 RATINGEN
País:
GERMANY
Ülke:
ALMANYA
Nome do Produto :
ASUS Phone
Ürün adı :
ASUS Phone
Modelo :
ASUS_Z00VD
Model adı :
ASUS_Z00VD
2004/108/EC-EMC Direktifi
2004/108/EC-EMC Directiva
EN 55022:2010 / AC:2011
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
You acknowledge that all rights of this Manual remain with ASUS. Any
and all rights, including without limitation, in the Manual or website, and
shall remain the exclusive property of ASUS and/or its licensors. Nothing
in this Manual intends to transfer any such rights, or to vest any such
rights to you.
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
1999/5/EC-R&TTE Direktifi
1999/5/EC-R&TTE Directiva
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V7.1.1(2011-05)
EN 301 908-2 V6.2.1(2011-07)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001+A1:2012
EN 62479:2010
EN 50385:2002
EN 62311:2008
EN 62209-1:2006
EN 62209-2:2010
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50566:2013/AC:2014
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50566:2013/AC:2014
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF
ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS
MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND
ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.
2006/95/EC-LVD Direktifi
2006/95/EC-LVD Directiva
EN 60950-1: 2009 / A1: 2010
EN 60950-1: 2010 / A12: 2011
EN 60950-1: 2006 / A11: 2009
EN 60065:2002 / A12: 2011
EN 50332-1: 2013
EN 50332-2: 2013
EN 60950-1: 2009 / A1: 2010
EN 60950-1: 2010 / A12: 2011
EN 60950-1: 2006 / A11: 2009
EN 60065:2002 / A12: 2011
EN 50332-1: 2013
EN 50332-2: 2013
2009/125/EC-ErP Direktifi
2009/125/EC-ErP Directiva
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009
Regulation (EU) No. 617/2013
Regulation (EC) No. 642/2009
Regulation (EU) No. 617/2013
2011/65/EU-RoHS Directiva
Ver. 150326
2011/65/EU-RoHS Direktifi
CE iareti
0560
(Marca de Conformidade EC)
Assinatura : __________
sim :
Deklarasyon Tarihi: 08/06/2015
CE aretinin Eklendii Yıl: 2015
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)
(EC uygunluk iareti)
Pozisyon :
Posição : CEO
Nome :
Jerry Shen
Data de declaração: 08/06/2015
Ano para começar a aposição da marca CE: 2015
Ver. 150326
0560
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support:
http://vip.asus.com/eservice/techserv.aspx
All Rights Reserved.
Aaıdaki direktiflerin gereksinimlerine uyduunu deklare ederiz:
se encontra em conformidade com as exigências essenciais das seguintes directrizes:
Should you have any questions or comments regarding
this matter, please contact us.
Copyright © 2015 ASUSTeK COMPUTER INC.
Aaıdaki ürünün
declaramos que o seguinte produto:
Marca de CE
•
•
Declaration
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50566:2013/AC:2014
Directiva 2006/95/EC-LVD
EN 60950-1: 2009 / A1: 2010
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V7.1.1(2011-05)
EN 301 908-2 V6.2.1(2011-07)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001+A1:2012
EN 62479:2010
EN 50385:2002
EN 62311:2008
EN 62209-1:2006
EN 62209-2:2010
0.362 W/Kg (Head)
Ensure that your device is connected to the
Internet before using Google Map or any GPSenabled apps.
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V7.1.1(2011-05)
EN 301 908-2 V6.2.1(2011-07)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001+A1:2012
EN 62479:2010
EN 50385:2002
EN 62311:2008
EN 62209-1:2006
EN 62209-2:2010
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.6.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 50566:2013/AC:2014
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V7.1.1(2011-05)
EN 301 908-2 V6.2.1(2011-07)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001+A1:2012
EN 62479:2010
EN 50385:2002
EN 62311:2008
EN 62209-1:2006
EN 62209-2:2010
EN 55022:2010 / AC:2011
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
•
•
Directiva 1999/5/EC-R&TTE
1999/5/EC-R&TTE Directive
EC Declaração de Conformidade
DO NOT throw this product in municipal
waste. This product has been designed
to enable proper reuse of parts and
recycling. The symbol of the crossed out
wheeled bin indicates that the product
(electrical, electronic equipment and
mercury-containing button cell battery)
should not be placed in municipal waste.
Check local regulations for disposal of
electronic products.
ASUS Phone
ASUS_Z00VD
EN 55022:2010 / AC:2011
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
Nós, os abaixo assinados,
DO NOT throw the battery in municipal
waste. The symbol of the crossed out
wheeled bin indicates that the battery
should not be placed in municipal waste.
This equipment complies with the requirements of
Directive 1999/5/EC of the European Parliament and
Commission from 9 March, 1999 governing Radio and
Telecommunications Equipment and mutual recognition
of conformity.The highest CE SAR values for the device
are as follows:
To use the GPS positioning feature on your ASUS Phone:
Directiva 2004/108/EC-EMC
2004/108/EC-EMC Directive
Proper disposal
CE marking for devices with wireless LAN/
Bluetooth
este conform cu cerinele eseniale ale urmtoarelor directive:
conform with the essential requirements of the following directives:
CE marking
Using GPS (Global Positioning
System) on your ASUS Phone
ASUS
Address: 150 Li-Te Road, Peitou, Taipei, Taiwan
Tel: 886228943447
Fax: 886228907698
EC Declaratie de Conformitate
EC Declaration of Conformity
Address:
declare the following apparatus:
CE Mark Warning
For France, headphones/earphones for this device are
compliant with the sound pressure level requirement
laid down in the applicable EN 50332-1:2013 and/or
EN50332-2:2013 standard required by French Article
L.5232-1.
Manufacturer:
2011/65/EU-RoHS Directive
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
This device meets the EU requirements (1999/519/EC)
on the limitation of exposure of the general public to
electromagnetic ields by way of health protection.
While there may be differences between the SAR levels
of various phones and at various positions, they all meet
the government requirements.
2006/95/EC-LVD Directive
This ASUS Phone complies
with IDA Standards.
CE RF Exposure Compliance
For this device, the highest reported SAR value for usage
against the head is 0.57 W/kg, for usage near the body
is 1.13 W/kg.
We, the undersigned,
Regional notice for Singapore
RF exposure compliance with any body-worn accessory,
which contains metal, was not tested and certiied, and
use such body-worn accessory should be avoided.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
SAR information on this model phone is on ile with the
FCC and can be found under the Display Grant section
of www.fcc.gov/oet/ea/fccid after searching on FCC ID:
MSQZ00VD.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our
commitment to the highest standards for protecting our
environment. We believe in providing solutions for you
to be able to responsibly recycle our products, batteries,
other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for
detailed recycling information in different regions.
SAR compliance for body-worn operation is based on a
separation distance of 10 mm between the unit and the
human body. Carry this device at least 10 mm away from
your body to ensure RF exposure level compliant or lower
to the reported level. To support body-worn operation,
choose the belt clips or holsters, which do not contain
metallic components, to maintain a separation of 10 mm
between this device and your body.
CEO
Jerry Shen
mza : __________
15060-58800100
