For the user

Any previous programmes are cancelled and the AUTO symbol

Bạn đang đọc: For the user – Bompani Cucina Tech handleiding

flashes .

NOTE: when the AUTO symbol is flashing the oven cannot be

usedmanually.

” + ” AND ” – ” BUTTONS- Pressing the ” + ” or ” – ” buttons makes time go up or down at

variablespeed according to how long the button is pressed for.

MANUAL USE

– Press the

MANUAL

button: the

AUTO

symbol goes out (if ﬂashing or

permanently on) the

SAUCEPAN

symbol lights up and the oven can

be used by adjusting the thermostat knob and the selector switch

according to the instructions given in the manual.

AUTOMATIC OPERATION WITH END OF COOKING AND DURA-

TION TIMERS

– Let’s use an example: it is 9:25 am; you want the oven to switch on

at 11 am and switch off at 12 pm (cooking time 1 hour).

– Press the

COOKING DURATION

button and within 5 seconds press “+”

button until it shows 01.00, adjust using “-” button if necessary. The

AUTO

and

PAN

symbols come on permanently.

– Press the

END OF COOKING

button and within 5 seconds press “+”

button until it shows 12.00. The

PAN

symbol goes out but the AUTO

symbol remains permanently on.

– Move the oven thermostat knob to the desired temperature, and the

selector switch to the required cooking method; the red warning light

comes on the oven light comes on and the timer is ready to start: at

11am the oven will come on automatically and the

PAN

symbol will

light up.

– When cooking is over (12 am) the

AUTO

symbol ﬂashes, the PAN

symbol goes out and a buzzer sounds; to turn off the buzzer press

any button.

– Move the thermostat and selector knob to the OFF position.

SEMI-AUTOMATIC OPERATION WITH COOKING DURATION

SELECTION

– Let’s take an example: it is 11:35 am and you want the oven to stay

on for 25 minutes from now on.

– Press the

COOKING DURATION

button and within 5 seconds press the

“+” button until it shows 00.25, adjusting the time with the “-” button

if necessary. The

AUTO

and

PAN

symbols light up permanently.

– Turn the oven thermostat knob to the desired temperature and the

selector switch to the required cooking method; the red warning light

comes on, the oven light comes on and the oven starts to operate.

– After 25 minutes the oven and the

PAN

symbol go out. The AUTO

symbol ﬂashes and the buzzer tells you that cooking is over: to turn

off the buzzer press any button.

Xem thêm: Sửa máy giặt bompani giá ưu đãi tại tphcm

– Then move the oven thermostat knob and the selector switch to the

OFF position.

MINUTE MINDER

– Press the

MINUTE MINDER

button and choose the desired time using

the “+” or “-” button.

– The

BELL

symbol lights up when the minute minder is in use.

– When the pre-set time is over, the buzzer sounds and the

BELL

symbol goes out.

BUZZER

– The buzzer sounds at the end of a programme and lasts for a maxi-

mum of 7 minutes.

– To turn it off, press any button.

– Pressing the “-” button without having previously selected a function

the frequency of the signal changes. A selection from 3 possibilities

can be made. The selected signal is audible as long as the “-” button

is pressed.

STARTING AND CHECKING A PROGRAMME

– The programme starts after about 4 seconds of it being set.

– The set programme can be checked at any point by pushing the

corresponding buttons.

PROGRAMMING ERRORS

– Example: at 12:15 pm a COOKING DURATION time of 30 minutes

is set and a END OF COOKING is programmed in at 12:30 pm.

– The programme error can be rectiﬁed by changing the duration or

the end of cooking time, or by pressing the MANUAL button and

programming again.

– If there is a programming error the oven will not come on.

ANNULLING A PROGRAMME

– A programme can be cancelled by pressing the COOKING DURA-

TION button and then the “-” button until the display shows 0.00.

IMPORTANT:AT THE END OF EVERY PROGRAMMED COOKING

OPERATION YOU ARE ADVISED TO PRESS THE BUTTON,

OTHERWISE THE OVEN CANNOT BE OPERATED MANUALLY.

USING THE ELECTRONIC TIMER WITH PUSH KNOBGENERAL OPERATION

This timergoverns the time display ( withanalog hands) and the

operation of the oven ( using push knob and indicator icons ) .

Pushing on the the knob, you can: adjust the time, program the

start time and end of cooking, set the alarm ( Minute Minder ) .SETTING TIMETo adjust the clock press the knob briefly 4 times until you getthe flashing of the “ CLOCK ” icon. Hence to increase or

decrease the time, turn knob clockwise or counter-clockwise .

After 10 seconds of the last adjustment the electronic timerautomatically exit time setting mode .MANUAL COOKINGDuring default condition, timer allows manual firing of the ovenusing the general oven switch ( external to the timer ) .PROGRAMMING END COOKING TIME

Cooking end programming allows you to start immediately and

stop cooking in an automatic manner based on the time

scheduled. To program the end of cooking time briefly press 2

times the knob until you get the flashing of “END TIME” icon. To

increase or decrease the cooking time, turn knob clockwise or

counterclockwise. The flashing of “END TIME” icon continues

for some seconds after the last rotation. The program can be

confirmed by pressing the knob (at least 2 minutes of cooking

time). Upon confirmation of the program, the cooking is started

and the alarm is automatically activated. Cooking stops when

“Programmed End Time = Present Time”. To view the program

press and release the knob and the timer show the selected

program. When cooking stops the “END TIME” icon flashes and

the alarm beeps. After 1 minute beeps are disabled and the icon

“END TIME” remains flashing until you press the knob. To

cancel the program before the end, press the knob for some

seconds and the program will be canceled and the timer returns

to manual cooking mode .

USE OF SINGLE-CONTROL ENDOF COOKING TIMER

(WITHOUT CLOCK) (FIG.

)

This allows the cooking time to be programmed. Operation : -Move the knob to the desired cooking time ( 120 mins max. ). –

Choose the temperature usingthe thermostat knob and move

the selector knob to the required cooking method .

– When the programming knob is at the 0 position the ovenwill

switch itself off. This is automatic .

– Move the thermostat knob back to symbol .

– Move the selector knob to symbol 0 ..

N.B.

If the timer is not used, the oven programming knob is to

Xem thêm: Bompani BO243ZY/E manual

be set to the manual position .

Source: https://dvn.com.vn
Category : Bompani